Search for spare parts
Enter the name of the product / OC or EAN in search field for which you are looking for a spare part. Confirm your selection by entering or clicking on magnifying glass icon. After confirmation, you will see an offer of spare parts for your chosen product.
How to choose a spare part
Spare parts are numbered in the form - Product name # number. The number after the # grid indicates the part of a specific spare part. Especially for rods, the smallest number #1 is the tip, and the largest is the handle. The handle will be marked as #2 for the two part rod. For three part rod the handle will be marked as #3, because #2 is the middle part. The exceptions are feeder rods, where the tip is not the spare part itself, and the mark #1 represents the uppermost part of the blank itself - the part where the feeder tips are inserted. Double compartment feeder rod case Delphin ATOMA
Delphin ATOMA was designed for all fans of feeder fishing. It can be described as a soft case with two separate chambers. It is made of foam padding, which is coated with fine nylon textile. This combination protects your valuable rods and reels from damage. The case is equipped with an outer T-PROTECT pocket, specially designed to store the tube with spare feeder tips. On the same side, you will find zipper pocket for storing fishing accessories.
On the other side, there is a clip pocket designed for a folding landing net or landing net handle. There is also a zipper pocket designed for storing standard-sized EVA rod holders. We can also find there narrow pockets designed for bank sticks and these can be fastened with a strap.
The case provides a generous space, where you do not need to remove the reels from rods, which is letting you to set up the gear very quickly. The case uses practical and high-quality two-way zippers. Zipper sliders are equipped with practical zipper pullers. The combination of black and red is typical for the ATOMA series.
Technical parameters:
Type ATOMA 120cm
Dimensions: 120x25x15cm
Pocket size: 40x10cm
Pocket size T-pocket: 66x6cm
Suitable for rods: 300cm / 3pcs, 330cm / 3pcs
Type ATOMA 135cm
Dimensions: 135x27x15cm
Pocket size: 40x10cm
Pocket size T-pocket: 66x6cm
Suitable for rods: 360cm / 3pcs
Type ATOMA 145cm
Dimensions: 145x29x15cm
Pocket size: 40x10cm
Pocket size T-pocket: 66x6cm
Suitable for rods: 390cm / 3pcs
On the other side, there is a clip pocket designed for a folding landing net or landing net handle. There is also a zipper pocket designed for storing standard-sized EVA rod holders. We can also find there narrow pockets designed for bank sticks and these can be fastened with a strap.
The case provides a generous space, where you do not need to remove the reels from rods, which is letting you to set up the gear very quickly. The case uses practical and high-quality two-way zippers. Zipper sliders are equipped with practical zipper pullers. The combination of black and red is typical for the ATOMA series.
Technical parameters:
Type ATOMA 120cm
Dimensions: 120x25x15cm
Pocket size: 40x10cm
Pocket size T-pocket: 66x6cm
Suitable for rods: 300cm / 3pcs, 330cm / 3pcs
Type ATOMA 135cm
Dimensions: 135x27x15cm
Pocket size: 40x10cm
Pocket size T-pocket: 66x6cm
Suitable for rods: 360cm / 3pcs
Type ATOMA 145cm
Dimensions: 145x29x15cm
Pocket size: 40x10cm
Pocket size T-pocket: 66x6cm
Suitable for rods: 390cm / 3pcs
| Ordering nr. | Product, size | Retail price | In stock |
|---|---|---|---|
| 101000453 | Double compartment feeder rod case Delphin ATOMA 120cm/330cm-3sec |
38.95 € |
 |
You must log in before purchasing products. Please log in at the top of the page or register here.
© 2004 - 2024 | Delphin.sk