Search for spare parts
Enter the name of the product / OC or EAN in search field for which you are looking for a spare part. Confirm your selection by entering or clicking on magnifying glass icon. After confirmation, you will see an offer of spare parts for your chosen product.
How to choose a spare part
Spare parts are numbered in the form - Product name # number. The number after the # grid indicates the part of a specific spare part. Especially for rods, the smallest number #1 is the tip, and the largest is the handle. The handle will be marked as #2 for the two part rod. For three part rod the handle will be marked as #3, because #2 is the middle part. The exceptions are feeder rods, where the tip is not the spare part itself, and the mark #1 represents the uppermost part of the blank itself - the part where the feeder tips are inserted. Feeder rod holder Delphin EVA Vario
EVA VARIO is a sophisticated rod holder designed primarily for feeder technique. Its surface is made from black EVA foam, which perfectly holds the rod in place and prevents its damage. Due to the irregular, wavy shape of the foam, the line can pass freely when engaged in the groove. Ends of the holder are provided with plastic protrusions preventing the rod from falling during sharp shots. An interesting feature is the sophisticated tightening system, thanks to which it is possible to adjust the side plastic protrusions to any angle. You can adjust the holder whether you are catching with the tips of the rods up or just above the water surface. The whole system is then fixed by screwing it to the feeder stand, the strut or another support.
Technical parameters:
Total length: 30cm
Diameter: 28mm
Technical parameters:
Total length: 30cm
Diameter: 28mm
| Ordering nr. | Product, size | Retail price | In stock |
|---|---|---|---|
| 101001469 | Feeder rod holder Delphin EVA Vario 30cm |
17.99 € |
 |
You must log in before purchasing products. Please log in at the top of the page or register here.
© 2004 - 2024 | Delphin.sk