Search for spare parts
Enter the name of the product / OC or EAN in search field for which you are looking for a spare part. Confirm your selection by entering or clicking on magnifying glass icon. After confirmation, you will see an offer of spare parts for your chosen product.
How to choose a spare part
Spare parts are numbered in the form - Product name # number. The number after the # grid indicates the part of a specific spare part. Especially for rods, the smallest number #1 is the tip, and the largest is the handle. The handle will be marked as #2 for the two part rod. For three part rod the handle will be marked as #3, because #2 is the middle part. The exceptions are feeder rods, where the tip is not the spare part itself, and the mark #1 represents the uppermost part of the blank itself - the part where the feeder tips are inserted. Rod case Delphin ATOMA Triple
A three-chamber case from the Delphin brand, which has been expertly crafted to meet the requirements of even the most demanding fans of feeder fishing.
It is designed in a typical burgundy-black combination characteristic of the ATOMA range feeder products. The side and bottom walls of the case are thoroughly padded, which guarantees stress free transport, cause your rods are always safe. Each chamber has a separate opening with a zip, so that the rods are separated from each other and protected from being damaged. Each chamber also has padded pockets for storing the rods, which can also be perfectly fixed with Velcro straps. Rods stored and fixed in this way will always remain in their place no matter what.
The advantage of the ATOMA case also lies in the fact that the rods are placed inside with the reels facing upwards. The main advantage of such a system is that the reels do not come into contact with the ground when putting the case down. As a result they are better protected and the chance them getting damaged is minimized.
There are two zip pockets on the sides as well. One of them is extra long and can be used to store, for example, a landing net pole, or various feeder rod holders and pods. In addition an outer pocket and a tightening strap with a clip are sewn onto this pocket from the outside. You can use this pocket to transport, for example, another rod, rod pods or other accessories. On the other side of the case there is a smaller pocket with zip, that is ideal for the tube, in which you carry your feeder tips. The case is sewn from a very durable and strong fabric that premature wear and tear and damages. The burgundy parts are made of a waterproof, high-quality fabric, which can easily withstand lighter rain showers. The Delphin ATOMA has a shoulder strap with adjustable length and padding, but is also equipped with handles that facilitate transport. Quality zips with pullers, an interesting design and detailed workmanship make this case not just very effective but also extremely practical.
Technical parameters:
Model: Puzdro Delphin ATOMA Triple 360-3
Outer length of the case: 132 cm
Length of the side pocket: 110 cm
Tip bag length : 66 cm
The part for the rods: 360cm / 3 pcs
Model: Puzdro Delphin ATOMA Triple 390-3
Outer length of the case: 147 cm
Length of the side pocket: 110 cm
Tip bag length : 66 cm
The part for the rods: 390cm / 3 pcs, 400cm / 3 pcs
It is designed in a typical burgundy-black combination characteristic of the ATOMA range feeder products. The side and bottom walls of the case are thoroughly padded, which guarantees stress free transport, cause your rods are always safe. Each chamber has a separate opening with a zip, so that the rods are separated from each other and protected from being damaged. Each chamber also has padded pockets for storing the rods, which can also be perfectly fixed with Velcro straps. Rods stored and fixed in this way will always remain in their place no matter what.
The advantage of the ATOMA case also lies in the fact that the rods are placed inside with the reels facing upwards. The main advantage of such a system is that the reels do not come into contact with the ground when putting the case down. As a result they are better protected and the chance them getting damaged is minimized.
There are two zip pockets on the sides as well. One of them is extra long and can be used to store, for example, a landing net pole, or various feeder rod holders and pods. In addition an outer pocket and a tightening strap with a clip are sewn onto this pocket from the outside. You can use this pocket to transport, for example, another rod, rod pods or other accessories. On the other side of the case there is a smaller pocket with zip, that is ideal for the tube, in which you carry your feeder tips. The case is sewn from a very durable and strong fabric that premature wear and tear and damages. The burgundy parts are made of a waterproof, high-quality fabric, which can easily withstand lighter rain showers. The Delphin ATOMA has a shoulder strap with adjustable length and padding, but is also equipped with handles that facilitate transport. Quality zips with pullers, an interesting design and detailed workmanship make this case not just very effective but also extremely practical.
Technical parameters:
Model: Puzdro Delphin ATOMA Triple 360-3
Outer length of the case: 132 cm
Length of the side pocket: 110 cm
Tip bag length : 66 cm
The part for the rods: 360cm / 3 pcs
Model: Puzdro Delphin ATOMA Triple 390-3
Outer length of the case: 147 cm
Length of the side pocket: 110 cm
Tip bag length : 66 cm
The part for the rods: 390cm / 3 pcs, 400cm / 3 pcs
| Ordering nr. | Product, size | Retail price | In stock |
|---|---|---|---|
| 101001527 | Rod case Delphin ATOMA Triple 360-3 130cm |
82.90 € |
 |
| 101001528 | Rod case Delphin ATOMA Triple 390-3 145cm |
84.99 € |
|
You must log in before purchasing products. Please log in at the top of the page or register here.
© 2004 - 2024 | Delphin.sk