Search for spare parts
Enter the name of the product / OC or EAN in search field for which you are looking for a spare part. Confirm your selection by entering or clicking on magnifying glass icon. After confirmation, you will see an offer of spare parts for your chosen product.
How to choose a spare part
Spare parts are numbered in the form - Product name # number. The number after the # grid indicates the part of a specific spare part. Especially for rods, the smallest number #1 is the tip, and the largest is the handle. The handle will be marked as #2 for the two part rod. For three part rod the handle will be marked as #3, because #2 is the middle part. The exceptions are feeder rods, where the tip is not the spare part itself, and the mark #1 represents the uppermost part of the blank itself - the part where the feeder tips are inserted. Delphin HotSPOD 4 / orange
The name HOT SPOD defines a series of lines, designed primarily for "bottoming", enabling you to transport the feed to the right place. Excellent load-bearing capacity and abrasion resistance are ensured by 4 PE fibers, used to plait HOT SPOD 4X . Due to its small diameter and flexibility, it unwinds from the spool very easily during casting and creates almost no resistance when passing through the eyes of the rod. At the same time, however, it has sufficient load capacity to handle heavy feeding rocket launches over long distances. Zero extensibility devotes it for use with a marker when establishing the structure and depth of the bottom.
MM/LBS: 0.14mm 9.10kg
MM/LBS: 0.14mm 9.10kg
| Ordering nr. | Product, size | Retail price | In stock |
|---|---|---|---|
| 101001632 | Delphin HotSPOD 4 / orange 0,14mm 9,1kg 300m |
12.49 € |
 |
You must log in before purchasing products. Please log in at the top of the page or register here.
© 2004 - 2024 | Delphin.sk