English / EUR - €
Language
English
Slovensky
Česky
English
Magyarul
Polski
Română
Deutsch
Français
Currency
EUR - €
EUR - €
CZK - Kč
HUF - Ft
RON - Lei
PLN - Zł

Veľkosklad rybárske potreby MOSS.SK spol. s.r.o. – veľkoobchod, rybársky eshop

Veľkosklad rybárske potreby MOSS.SK, Delphin, FIN

Tester (SK)Andrej Benka
Tester (FR)Fabrice Coulon
  • 2024 NEWS
  • Rods and reels
  • Bite alarms and indicators
  • Landing nets
  • Rodpods and Rod rests
  • Fishing lines
  • Carp accessories
  • Feeder accessories
  • Predator accessories
  • Universal fishing accessories
  • Fishermen aids
  • Boots, clothes, sunglasses
  • Bags and Camping
  • Additional assortment
  • Hunting
  • Discount sets
  • Video catalogue - News 2024
    Spare parts
    How to choose a spare part
    Spare parts are numbered in the form - Product name # number. The number after the # grid indicates the part of a specific spare part. Especially for rods, the smallest number #1 is the tip, and the largest is the handle. The handle will be marked as #2 for the two part rod. For three part rod the handle will be marked as #3, because #2 is the middle part. The exceptions are feeder rods, where the tip is not the spare part itself, and the mark #1 represents the uppermost part of the blank itself - the part where the feeder tips are inserted.

    Delphin ETNA E3 Cork

    We’re introducing Delphin ETNA E3 cork, the third series of the most successful Delphin carp rods. We tried to keep all the good parameters that make this rod a bestseller and also add something new to increase the quality and reliability of this product. This was the idea behind the technology called Delphin 2Power. The technology consists of two elements: PowerWrap and PowerJoin. Both are applied on every E3 series model. You’ll notice PowerWrap right from the start, it’s an additional carbon wrapping all along the rod length that increases the strength and durability against overcharge. In practice, it translates to improved lifespan of the product and damage protection. Plus, the wrapping gives a stylish structured look. We heard the demands of those who prefer cork handles and the second generation of Etna is fitted with a cork handle option. PowerJoin is less noticeable than PowerWrap, but it’s still a very important part of the ensemble. It’s a small metal ring at the end of each piece to avoid chipping.

    Even though the blanks are fortified, they are also thinner. It’s safe to say they are one of the thinnest in their category. The blanks still have their exceptional properties when it comes to casting and fighting with parabolic action.

    They are fitted with quality SiC guides that guide the line very well.

    E3 brings along models you haven’t seen in our offer yet. These are two-piece models of 2.7 and 3.3 length, ideal for smaller grassy bodies of water, but also for various other techniques including trolling or boat fishing.

    Technical information:

    Model 270cm/2.50lbs
    Number of parts: 2
    Blank diameter above the handle: 11.13 mm
    Number of guides: 6
    Transport dimensions: 140 cm
    Weight: 258 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 53 cm
    Butt guide dimensions: #40

    Model 300cm/3.00lbs
    Number of parts: 2
    Blank diameter above the handle: 11.53 mm
    Number of guides: 6
    Transport dimensions: 154 cm
    Weight: 302 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 56 cm
    Butt guide dimensions: #40

    Model 330cm/3.00lbs
    Number of parts: 2
    Blank diameter above the handle: 12.07 mm
    Number of guides: 6
    Transport dimensions: 170 cm
    Weight: 318 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 59 cm
    Butt guide dimensions: #40

    Model 360cm/3.00lbs
    Number of parts: 2
    Blank diameter above the handle: 13.22 mm
    Number of guides: 6
    Transport dimensions: 187 cm
    Weight: 358 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 63
    Butt guide dimensions: #50

    Model 380cm/3.50lbs
    Number of parts: 2
    Blank diameter above the handle: 15 mm
    Number of guides: 6
    Transport dimensions: 193 cm
    Weight: 464 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 66 cm
    Butt guide dimensions: #50

    Model 390cm/3.00lbs
    Number of parts: 2
    Blank diameter above the handle: 15.11 mm
    Number of guides: 6
    Transport dimensions: 199 cm
    Weight: 530 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 68 cm
    Butt guide dimensions: #50

    Model 360cm/3.00lbs
    Number of parts: 3
    Blank diameter above the handle: 13.06 mm
    Number of guides: 6
    Transport dimensions: 126 cm
    Weight: 384 g
    Handle: Cork
    Handle length (from the bottom of the rod to the reel seat centre): 63 cm
    Butt guide dimensions: #50

    Ordering nr. Product, size Retail price In stock
    101002928 Delphin ETNA E3 cork / 2 parts
    380cm/3,50lbs
    89.95 €
    Manufacturer:
    MOSS.SK, s.r.o.,
    M.R.Štefánika 297/11,
    050 01 Revúca, Slovakia,
    www.delphin.sk, info@moss.sk

    You must log in before purchasing products. Please log in at the top of the page or register here.